¿À¸µ Äõµå¸µ ¿ÀÀϾÁ Å×ÇÁ·Ð¸³¾Á ¿¡³ÊÀÚÀ̵å¾Á ¸ÞÄ«´ÏÄ®¾Á °¥·ÏÁ¦Ç°1 °¥·ÏÁ¦Ç°2 All Seals
   Klosure Oil Seal & Bearing Isolator       Inflatable Seal       Hydraulic Components   
 

Ȩ>°¥·ÏÁ¦Ç°1-

  Model 26
  
Economical Rubber O.D. Seal
Fabric-reinforced heel for added durability
Molded-in finger spring  ensures equal shaft loading and spring retention during installation and operation
Reverse bevel lip prevents lip rollover during installation
Single or dual lip avavalable solid or split

 Specifications

 Bore sizes:

 19.1 ~ 1524 mm

 Shaft speed:

 To 5000 fpm (25.4 m/s)

 Misalignment and runout:

 ±0.38 mm at 5.1 m/s
 ±0.25 mm at 10.2 m/s
 ±0.20 mm at 25.4 m/s

   Model 57
  Best Elastomeric Caster Seal
The most positive seal at low speedsbr>
Metal-reinfroced heel for extra strength and rigidity
Molded-in finger spring ensures equal shaft loading and spring retention during installation and operation
Reverse bevel lip prevents lip rollover during installation
Available in single or dual lip design*

 Specifications

 Bore sizes:

 50.8 ~ 305 mm

 Shaft speed:

 To 500 fpm (2.5 m/s)

 Misalignment and runout:

 ±0.38 mm at 2.5 m/s

 * Models 26 and 57 available in nitrile, silicone, fluoroelastomer and MILL-RIGHT¢ç

   Model 58
  
High Temperature Barrier Seal
Best temperature, chemical and abrasion resistance
Ideal where seal area temperatures exceed 204¡É
Stainless steel case and THERMO-CERAM¢â element withstand temperatures to 870¡É
Perfect alternative to fey rings

 Specifications

 Bore sizes:

 50.8 ~ 305 mm

 Temperature:

 To 870¡É

 Shaft speed:

 To 500 fpm (2.5 m/s)

 Misalignment and runout:

 ±0.38 mm at 2.5 m/s

   Model 23
  
With FDA-Compliant Silicone Element
Standard split construction for easy installation;solid also available upon request
Rubber O.D. provides positive bore sealing
Stainless steel, molded-in, finger-type spring
   ¢¡Won't pop out during installation or operation
   ¢¡Won't trap contaminants
   ¢¡Ensures equal shaft loading
Also available with encapsuated spring, or without spring

   Model 53 and 63
  With Stainless Steel Cases and FDA-  Compliant Silicone Element
Ideal where metal is preferrred to rubber O.D.
Stainless steel, assembled, finger-type spring
   ¢¡Won't pop out during installation or operation
   ¢¡Won't trap contaminants
   ¢¡Ensures equal shaft loading

   Model 61
  
With FDA-Compliant GYLON® Element
Proprietary GYLON® sealing element withstands wide temperature range and most aggressive chemicals
GYLON® material offers high tensile strength, lower cold flow and creep than standard PTFE
Can run dry to 700 fpm (3.6 m/s)
Pressure rating to 150 psi (10 bar)
Multiple lip configurations also available

   ISO-GARD® Bearing Isolator
  With FDA-Compliant glass-filled PTFE
Non-contact design eliminates shaft scoring, drag and frictional heat - no lubrication required
PTFE material provides excellent chemical resistance and wide temperature capability
Perfect alternative to lip seals in non-flooded environments

 

¼­¿ïƯº°½Ã ¼ÛÆı¸ Ãæ¹Î·Î 52, °¡µçÆÄÀ̺ê¿÷½º B-603
ºÎ»ê°øÀå : ºÎ»ê »ç»ó±¸ °¨Àüµ¿ 172-6 ¹øÁö
Tel : 070-4027-4882      Fax : 070-4027-4885      Email : sales @anyseal.co.kr